Equipment/LaserPro Mercury II: Difference between revisions
→Preparing Files: general update
(→Using the Laser Cutter: general update.) |
(→Preparing Files: general update) |
||
Line 79:
# When the job is complete, turn off the extractor and remove your material from the laser bed.
== Preparing Files
# Open the
#
# Position your cut in the bed
# For each layer in your design:
# Double click the layer and set the colour where black is cut first then red (eg use black for internal, that red to cut the outer last)
# File -Print- print
# Pen (tab)- Set the power and speed for each layer, note unlike the glass tubed lasers this one can be ran at 100% without damaging the laser.
#for rasters, adjust laser power in raster menu if needed.
# Once all layers have been set, click
== Troubleshooting ==
|